Divider

 

Postage and Packing Notice.

Due to the variable value and weight of each individual order, the postage and packing cost will be calculated after submitting the order, I will contact you by email to advise you of the total cost and give you details of how to pay.

Divider

 

 

Divider

Clevedon Steam Plants

  1. All Clevedon Steam boiler kits are supplied with a painted, pressure tested boiler. They include wood lagging and boiler bands, baseplate, burner and jet holder, boiler fittings and chimney. A nut and 4mm union is supplied, but a steam pipe can be ordered at extra cost to customers' requirements. The photos below depict display models only.
    All complete steam plants contain a painted boiler, walnut wood lagging, all necessary boiler fittings, stainless steel baseplate, engine kit, condenser tank and all pipework.
    A gas can valve for disposable cans, or a refill adaptor for refillable gas tanks, will be required to steam the plants.
    Maximum working pressure is 45 psi, or 3 Bar, and all boiler kits come with a certificate of hydraulic testing to twice working pressure.
    If you already own a steam engine, it can be paired with a Clevedon Steam boiler kit. Pipework does not come with the boiler kits, but can be supplied as a standard length steam pipe, or made to customers' requirements.

Prices for boiler kits and complete steam plants are:

Boiler kits

  • Virgo Horizontal Boiler £300  - Postage extra
  • Virgo Vertical Boiler  £300  - Postage extra
  • Libra Horizontal Boiler  £405  - Postage extra    (Please note: specify if it is for a twin engine set up, as there are two steam outlets from the dome instead of the one on a normal Libra Horizontal.)
  • Libra Vertical Boiler  £405  - Postage extra
  • Taurus Horizontal Boiler  £545 - Postage extra
  • Scorpio Boiler Kit £490  - Postage extra

Steam plant kits

  • Virgo Horizontal Plant  £530  - Postage extra
  • Virgo Vertical Plant  £530 - Postage extra
  • Libra Horizontal Plant  £650 - Postage extra
  • Libra Vertical Plant  £650  - Postage extra
  • Virgo Twin Plant  (Libra Boiler)£875  - Postage extra
  • Libra Twin Plant (Taurus Boiler)  £1050  - Postage extra
  • Virgo Paddle Plant  £580  - Postage extra
  • Libra Paddle Plant  £690  - Postage extra

How to Order:
I require a deposit of 50% on ordering, to cover the  cost of making the boiler. Remainder to be paid before despatch. All prices are plus postage and packing.
The price list is also available by sending an SAE to me, the address can be found on the Contact Us web page

 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Libra Paddle Plant Kit

  • Length ca. 300 mm  
  • Boiler height 120 mm  
  • Width 110 mm  
  • Boiler diameter 90 mm  
  • Weight working 3 kg  
  • Volume full  650 mls

Boiler kit

  • Libra Horizontal Boiler  £405  - Postage extra

Steam plant kit

  • Libra Paddle Plant  £690  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Libra Horizontal Plant Kit

  • Length 270 mm
  • Boiler height  120 mm
  • Width  110 mm
  • Boiler diameter  90 mm
  • Weight working  2.9 kg
  • Volume full  650 ml

The Libra engine will turn a propeller of 3" or 75mm diameter.

Boiler kit

  • Libra Horizontal Boiler  £405  - Postage extra

Steam plant kit

  • Libra Horizontal Plant  £650  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Libra Vertical Plant Kit

  • Length 215 mm
  • Boiler height  155 mm
  • Width  100 mm
  • Boiler diameter  90 mm
  • Weight working  2.9 kg
  • Volume full  650 ml

The Libra engine will turn a propeller of 3" or 75mm diameter.

Boiler kit

  • Libra Vertical Boiler  £405  - Postage extra

Steam plant kit

  • Libra Vertical Plant  £650  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Libra Twin Plant Kit

  • Length 300 mm
  • Boiler height  140 mm
  • Width  110 mm
  • Boiler diameter  100 mm
  • Weight working  4.1 kg
  • Volume full  820 ml

The Libra engine will turn a propeller of 3" or 75mm diameter.

Boiler kit

  • Taurus Horizontal Boiler  £545  - Postage extra

Steam plant kit

  • Libra Twin Plant (Taurus Boiler)  £1050  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Virgo Paddle Plant Kit

  • Length ca 300 mm
  • Boiler height  110 mm
  • Width  110 mm
  • Boiler diameter  75 mm
  • Weight working  2.2 kg
  • Volume full  440 ml

Boiler kit

  • Virgo Horizontal Boiler £300  - Postage extra

Steam plant kit

  • Virgo Paddle Plant  £580  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Virgo Horizontal Plant Kit

  • Length 250 mm
  • Boiler height  110 mm
  • Width  110 mm
  • Boiler diameter  75 mm
  • Weight working  2.1 kg
  • Volume full  440 ml

The Virgo engine will turn a propeller of 2 1/2" or 65mm diameter maximum.

Boiler kit

  • Virgo Horizontal Boiler £300  - Postage extra

Steam plant kit

  • Virgo Horizontal Plant  £530  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Virgo Vertical Plant Kit

  • Length 190 mm
  • Boiler height  140 mm
  • Width  100 mm
  • Boiler diameter  75 mm
  • Weight working  2 kg
  • Volume full  450 ml

The Virgo engine will turn a propeller of 2 1/2" or 65mm diameter maximum.

Boiler kits

  • Virgo Vertical Boiler  £300  - Postage extra

Steam plant kit

  • Virgo Vertical Plant  £530  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Place your mouse over image to view in detail.

Virgo Twin Plant Kit

  • Length 300 mm
  • Boiler height  120 mm
  • Width  95 mm
  • Boiler diameter  90 mm
  • Weight working  3.4 kg
  • Volume full  650 ml

The Virgo engine will turn a propeller of 2 1/2" or 65mm diameter maximum.

Boiler kit

  • Libra Horizontal Boiler £405  - Postage extra    (Please note: specify if it is for a twin engine set up, as there are two steam outlets from the dome instead of the one on a normal Libra Horizontal.)

Steam plant kit

  • Virgo Twin Plant  £875  - Postage extra

 To Order click here
 

Divider

 

Back to Top

Pisces stationary Babcock type boiler

The Pisces stationary Babcock type boiler is designed to power mill engines etc. The pressure vessel is 3" or 75 mm diameter and 9 1/2" or 240 mm long. The casing is 4" or 100 mm wide, 9" or 230 mm long and 6 1/4" or 155 mm tall. The height over the boiler is 7 1/2" or 190 mm, with an overall height of 14 1/2" or 370 mm. The working pressure is 60 psi or 4 bar. The boiler is supplied with heat from twin pan burners. The boiler kit comprises a tested pressure vessel in silver soldered copper, with the casing in unpolished stainless steel. It is recommended that the casing is painted with heat proof black aerosol. The boiler can be left copper or sprayed black to match. All boiler fittings are supplied, along with the twin burners, gas pipe and gas can valve. The steam stop valve can be used with either the 4 mm or 3/16" coned unions supplied.

£495.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Scorpio Boiler Kit

Back to Top

Place your mouse over image to view in detail.

  • Length 200 mm
  • Boiler height  140 mm
  • Width  110 mm
  • Boiler diameter 105 mm
  • Weight working  2.7 kg
  • Volume full  800 ml
  • Maximum working pressure 60psi / 4bar

£490 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Libra Paddle Engine

This Twin Cylinder Inline. Double Acting Oscillating Engine has a Bore and Stroke of 7/16"/11mm. It will turn a propeller with a maximum diameter of 3"/75mm and power a boat with a maximum displacement of around 40lbs/18kg.
O/A Width 3 1/2"/90mm
O/A Height 2"/50mm
O/A Length 2 3/4"/70mm
Max working pressure 45psi/3bar
All dimensions are approximate

*Note
This engine is supplied in kit form with easy to follow instructions on how to assemble the components.
Click here to download the instructions  (Right Click and select - Save target/Link as...)

Click here to view more images

£250 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Libra Engine

This Twin Cylinder Inline. Double Acting Oscillating Engine has a Bore of 7/16"/11mm and a Stroke of 7/16"/11mm. It will turn a propeller with a maximum diameter of 3"/75mm and power a boat with a maximum displacement of around 40lbs/18kg.
O/A Width 2 3/4"/70mm
O/A Height 3 1/4"/80mm
O/A Length 3 1/4"/80mm
Max working pressure 45psi/3bar

*Note
This engine is supplied in kit form with easy to follow instructions on how to assemble the components.
Click here to download the instructions  (Right Click and select - Save target/Link as...)

Click here to download the instructions in German  (Right Click and select - Save target/Link as...)

£230 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Virgo Paddle Engine

This Twin Cylinder Inline. Double Acting Oscillating Engine has a Bore of 5/16"/8mm and Stroke of 7/16"/11mm. It will turn a propeller with a maximum diameter of 2 1/2"/65mm and power a boat with a maximum displacement of around 20lbs/9kg.
O/A Width 3 1/2"/90mm
O/A Height 2"/50mm
O/A Length 3"/75mm
Max working pressure 45psi/3bar
All dimensions are approximate

*Note
This engine is supplied in kit form with easy to follow instructions on how to assemble the components.
Click here to download the instructions  (Right Click and select - Save target/Link as...)

£250 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Virgo Engine

This Twin Cylinder Inline. Double Acting Oscillating Engine has a Bore of 5/16"/8mm and a Stroke of 7/16"/11mm. It will turn a propeller with a maximum diameter of 2-1/2"/65mm and power a boat with a maximum displacement of around 20lbs/9kg.
O/A Width 2 1/2"/65mm
O/A Height 3 1/4"/80mm
O/A Length 3"/75mm
Max working pressure 45psi/3bar

*Note
This engine is supplied in kit form with easy to follow instructions on how to assemble the components.
Click here to download the instructions  (Right Click and select - Save target/Link as...)

Click here to download the instructions in German  (Right Click and select - Save target/Link as...)

£210 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Deck Fittings

This pack consists of two ball cleats, eight bollards with four bases and two flag sockets

These brass fittings are designed for use on model boats such as steam launches.  The ball cleat is 9/16" - 17mm above deck and the ball is 7/16" - 11mm in diameter.  The bollards are 5/16" - 8mm above deck and are 1/4" - 6.4mm diameter.  The flagpole sockets are 7/16" - 11mm above deck and are 1/4" - 6.4mm diameter.

£22.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Clevedon Steam Electronic Gas Regulator

This Electronic Gas Regulator allows control of the gas supply to the burner and can be adjusted to shut down to pilot at a pre-set pressure thereby saving gas and steam. The pressure sensor can either be supplied with a 1/4 x 32 or 1/4 x 40 thread. A servo mounting bracket and a gas jet holder are available as accessories. The servo gas valve comes with a 1/8"coned union for silver soldering to the exisiting gas jet holder pipe.
Click here to download the instructions  (Right Click and select - Save target/Link as...)

£90.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Gas Valve Tool

This tool is for the fitting and removal of Ronson type and cheddar models' designed gas refill valves from gas tank bushes

£5.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

1/2inch Hand Force Pump

This hand pump is designed to be used with a remote water tank.  it is also suitable for use when pressure testing.  the pump is supplied with two 3/16" coned unions for silver soldering to the supply pipes.  the lever can be shortened if necessary.

 

If you have any queries please contact jerry at clevedon.steam@uwclub.net

£45.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

1/2inch Tender Pump

This hand pump is designed to be submerged in a loco tender or tank.  it is suitable for  5" gauge loco for example.  the pump is supplied with a 3/16" coned union for silver soldering to the supply pipe.  the lever can be shortened if necessary.

 

If you have any queries please contact jerry at clevedon.steam@uwclub.net.

£38.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

3/8" Ram Hand Force Pump

This hand pump is designed to be used with a remote water tank.  it is also suitable for use when pressure testing.  the pump is supplied with two 4mm union rings for silver soldering to the supply pipes. The lever can be shortened if necessary.

 

If you have any queries please contact jerry at clevedon.steam@uwclub.net

£40.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

3/8" Tender Pump

This hand pump is designed to be submerged in a loco tender or tank.  it is suitable for  3 1/2" gauge loco for example.  the pump is supplied with a 5/32" coned union for silver soldering to the supply pipe.  the lever can be shortened if necessary.

 

If you have any queries please contact jerry at clevedon.steam@uwclub.net)

£35.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Pack of Boiler Bushes 40tpi

This set comprises:

  • 5 no. 1/4' x 40 tpi fittings bushes
  • 1 no. 5/16' x 26 tpi safety valve bush
  • 1 no. 3/16' x 40 tpi syphon pipe bush

These brass bushes are for fitting in a new boiler to enable the use of Clevedon steam fittings

£6.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Pack of 2 Oil Cups.

These brass oil cups allow an increased volume of lubricating oil to be delivered to the bearings.  Dimensions are cup length 7/16' (11mm), diameter 1/4' (6mm) and outlet tube o/d 2.2mm.

£4.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Gas Refill Adaptor.

This adaptor is for use with disposable gas cans with a threaded outlet such as Coleman, Parasene, Tamar etc.  This enables the user to refill their gas tank as you would do a cigarette lighter.  It is recommended that you regularly lubricate the adaptor O ring where the tube enters the body.

£15.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Gas valve and Bush.

This valve and small bush are suitable for those who wish to build their own gas tanks for use in garden rail or Gauge 1 live steam locos for example.
The thread size is standard M4.5 x 0.5.
A Clevedon Steam gas refill adapter will be required to fill the tank. It is essential that this bush along with the gas tank is silver soldered during construction.

£8.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Replacement Gas refill valve.

Replacement gas refill valve, for use in all gas tanks with the standard M4.5 x 0.5 thread size

£5.00 + Postage Extra

Quantity:

Divider

Divider

 

Back to Top

Place your mouse over image to view in detail.

Lever Valve.

This valve is designed to be used as a either a throttle or blower valve.  a remotely mounted servo with rod can be used to activate the valve lever through 90 degrees.  A nut and 4mm union ring are provided for silver soldering to a steam pipe.  Adjustment of the lever is achieved by loosening the spindle lock nut, moving the lever and re-tightening it.  The inlet and outlet threads are 1/4" x 32 tpi.  if desired the valve can be supplied with a lock nut for threading into a boiler bush or alternatively a nut and union ring can be substituted.  Please advise on ordering.

£18.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

3/16" x 40tpi Blanking Plugs
for model steam boilers

These blanking plugs are intended for use on boiler bushes etc which are tapped with 3/16" x 40tpi.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

1/4" x 40tpi Blanking Plugs
for model steam boilers

These blanking plugs are intended for use on boiler bushes etc which are tapped with 1/4" x 40tpi.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Short Coupling 32tpi

This Coupling enables a fitting, such as a  Lubricator, to be spaced away from a Steam Engine. The thread at both end is 1/4"X32 TPI. Barrel Length is 5/16" or 8MM.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

BA Spanner Set

This set of BA Spanners is for use with Clevedon Steam/Cheddar Models' steam fittings. The range of sizes supplied is:

0-2, 1-3, 4-6, 5-7, 8-10, 9-11

£14.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

ABC/EGV Sensor

Replacement Temperature-Pressure sensor for Cheddar Automatic Boiler Level Control System.

£18.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Loco Safety Valve

This safety valve is a reproduction of the one used on the Cheddar Models "Hercules" garden rail loco. The thread size is 5/16" x 26 tpi. Height of body is 16 mm or 5/8".

£12.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

High Pressure Safety Valve for Model Steam Boilers

This safety valve is designed to operate in a range from 60 to 100 psi (4 - 7 bar).  The blow off pressure has been set at 80psi (5 bar).  The valve can be adjusted by turning the top cap with a slotted screwdriver.

The boiler bush thread size is 5/16" x 26tpi.

£12.00 + Postage Extra

Quantity:

Divider

 

Back to Top

3/4" Diameter Pressure Gauge for model steam boilers, range 0-6 bar.

This pressure gauge comes with a pipe liner for silver soldering to a syphon pipe. The union nut has a standard 3/16" x 40tpi thread. By removing the nut and liner, the gauge will fit directly on the Clevedon Steam syphon pipe. The square on the bottom of the gauge should be held in a spanner while tightening the union nut.

£26.00 + Postage Extra

Quantity:

Divider

 

Back to Top

3/4" Diameter Pressure Gauge for model steam boilers, range 0-80 psi

This pressure gauge comes with a pipe liner for silver soldering to a syphon pipe. The union nut has a standard 3/16" x 40tpi thread. By removing the nut and liner, the gauge will fit directly on the Clevedon Steam syphon pipe. The square on the bottom of the gauge should be held in a spanner while tightening the union nut.

£26.00 + Postage Extra

Quantity:

Divider

 

Back to Top

3/4" Diameter Pressure Gauge for model steam boilers, range 0-120 psi

This pressure gauge comes with a pipe liner for silver soldering to a syphon pipe. The union nut has a standard 3/16" x 40tpi thread. By removing the nut and liner, the gauge will fit directly on the Clevedon Steam syphon pipe. The square on the bottom of the gauge should be held in a spanner while tightening the union nut.

£26.00 + Postage Extra

Quantity:

Divider

 

Back to Top

5mm Gauge Glass for model steam boilers.  Supplied with two o-rings.

5mm gauge glass for model steam boilers.  Supplied with two o-rings.

When ordering this product, please ensure that you specify the length of gauge glass that you require.  This is calculated by measuring centre to centre of the boiler bushes and subtracting 8mm (5/16").

£1.50 + Postage Extra

Quantity:

Divider

 

Back to Top

Boiler Refill Valve for model steam boilers

This boiler refill valve is intended for use on smaller volume/working pressure boilers and can be connected to an engine or hand force pump with 5/32" copper pipe.  The valve comes with a union nut and 5/32" union ring for silver soldering to the water supply pipe.

The boiler bush thread size is 1/4" x 32tpi.

£8.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Compression Springs pack of 3. Model steam part

Pack of 3 stainless steel compression springs for reversing valves and cylinders for Cheddar Models' oscillating engines: Puffin, Pintail, Pegasus and Pelican.
Rated to 45 psi, 6mm x 12mm
When the springs become old and worn out/break they shorten and the engine loses performance due to a decrease in spring pressure.
I advise that any engine that is regularly run, and is more than 3 years old has the springs replaced to maintain optimum performance.

Any further questions please ask.

£4.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Condenser Tank (Medium) for model steam plants

This tank is designed to be used as a trap to prevent waste steam oil in the exhaust from the steam engine contaminating the environment. The condenser comes with sufficient silicone tube to connect to the engine exhaust and chimney (which should have an integral exhaust pipe). The remainder of the tube is connected to the tank drainpipe. In use, this tube is blanked with the rivet. To empty the tank, the rivet is removed and the chimney tube is pinched closed while the engine is run.  Dimensions of the tank are 65mm high x 42mm diameter.

£25.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Condenser Tank (Small) for model steam plants

This tank is designed to be used as a trap to prevent waste steam oil in the exhaust from the steam engine contaminating the environment. The condenser comes with sufficient silicone tube to connect to the engine exhaust and chimney (which should have an integral exhaust pipe). The remainder of the tube is connected to the tank drainpipe. In use, this tube is blanked with the rivet. To empty the tank, the rivet is removed and the chimney tube is pinched closed while the engine is run.  Dimensions of the tank are 60mm high x 28mm diameter.

£16.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Double ended Male Union

1 x double ended male union

These are screwed into a boiler bush and allow a pipe nut to be attached to the other end.

Thread size 1/4 x 32 tpi

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Place your mouse over image to view in detail.

Short Coupling 32tpi

This Coupling enables a fitting, such as a  Lubricator, to be spaced away from a Steam Engine. The thread at both end is 1/4"X32 TPI. Barrel Length is 5/16" or 8MM.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Short coupling 40 tpi

This coupling enables a fitting, such as a lubricator, to be spaced away from a steam engine. The thread at both ends is 1/4"x40 tpi. Barrel length is 5/16" or 8mm.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Female Converter 32 tpi

This female converter is for use in a 1/4"x40 bush or tapping to enable a 1/4"x32 fittingto be attached.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Female Converter 40 tpi

Female converter 40 tpi which has a 32 tpi male thread and a 40 tpi female thread.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Firetube Burner for model steam boilers and Cheddar locos

This gauze burner is designed to be a direct replacement for the Cheddar Models' ceramic burner. It is roughly twice as efficient as a ceramic burner. When used on Cheddar locos, the familiar howling noise is eliminated. The mixer tube internal diameter is 5/16"/ 8mm and will accept the Clevedon Steam no 5 gas jet pipe assembly which is required for this burner.

The burner head has an internal diameter of 28mm to be a push fit on a 28mm flue.

£26.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Large Firetube Burner for model steam boilers.

This gauze burner is a larger version of the standard Clevedon steam firetube burner.  It is roughly twice as efficient as a ceramic burner.  The mixer tube internal diameter is 5/16"/ 8mm and will accept the Clevedon steam no 8 gas jet pipe assembly which is required for this burner.  A no 12 jet can be substituted.

The burner skirt has an internal diameter of 35mm to be a push fit on a 35mm flue.  If it is required to fit in a larger diameter flue, an adaptor will need to be made.  The mixer tube length is 2" / 50mm and from the edge of the skirt to the head is 1" 3/4 / 45mm.  The burner head diameter is 28mm.

£35.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Pan Burner

This gauze burner is designed to be used with a vertical under-fired boiler up 3"/75mm diameter. It is roughly twice as efficient as a ceramic burner.  The mixer tube internal diameter is 5/16"/ 8mm and will accept the Clevedon steam no 5 or 8 gas jet pipe assembly which is required for this burner.  The bottom of the burner is tapped to accept two M3 screws which are supplied.

The burner head has a diameter of 30mm and is 20mm high.

£30.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Loco Gas Tank

Height: 25mm/1 3/16’
Diameter: 2 1/2" or 64 mm.

This gas tank is for use with small capacity boilers, eg. Mamod. Height of barrel 25 mm or 1 3/16" and diameter 2 1/2" or 64 mm. Outlet thread 1/4" x 32 tpi.

To fill this tank, you will require a Clevedon Steam gas refill adaptor.  The gas tap outlet thread is 1/4’ x 32TPI.

£50.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Small Gas Tank

Height: 53mm/2 1/16’
Height overall: 80mm/3 1/8’
Diameter: 63mm/2 1/2’

This size tank is suitable for the Virgo steam plant or Cheddar Models Pintail or Plover plants

To fill this tank, you will require a Clevedon Steam gas refill adaptor.  The gas tap outlet thread is 1/4’ x 32TPI.

£55.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Standard Gas Tank

Height: 73mm/2 7/8’
Height overall: 98mm/3 7/8’
Diameter: 63mm/2 1/2’

This size tank is suitable for the Libra steam plant or Cheddar Models Puffin or Pelican plants

To fill this tank, you will require a Clevedon Steam gas refill adaptor.  The gas tap outlet thread is 1/4’ x 32TPI.

£60.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Gas Can Valve

This valve is for use with disposable gas cans with a threaded outlet such as Coleman, Parasene, Taymar etc.  This enables the user to run their boat with a disposable gas can instead of a refillable gas tank.

The outlet thread is 1/4 x 32tpi and will accept the Clevedon Steam gas jet holder pipe

£18.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Gas Pipe Fitting for 1/8th pipe

This set comprises of a

  • Knurled nut
  • Gas pipe liner
  • 1x o-ring

The gas pipe liner is for silver soldering to 1/8th pipe.  The knurled nut and o-ring on the end of the gas pipe liner enable a removable but gas tight seal to a gas tank or union.  The o-ring should be glued in place.

Thread size 1/4 x 32 tpi

£3.50 + Postage Extra

Quantity:

Divider

 

Back to Top

Gas Pipe Fittings 40TPI

This set comprises of a

  • Knurled nut
  • Gas pipe liner
  • 1x o-ring

The gas pipe liner is for silver soldering to 1/8th pipe.  The knurled nut and o-ring on the end of the gas pipe liner enable a removable but gas tight seal to a gas tank or union.  The o-ring should be glued in place.

Thread size 1/4 x 40 tpi

£3.50 + Postage Extra

Quantity:

Divider

 

Back to Top

In-Line Lubricator for model steam boilers

This in line displacement type lubricator is intended for use with steam plants where the boiler has a steam stop tap fitted, enabling the live steam to the engine to be shut off to allow the lubricator to be emptied and replenished with fresh steam oil.  Two union nuts and 5/32" union rings are supplied for silver soldering to the steam pipe.  The hexagon lubricator cap eases removal if it locks 'tight' in use.  It should only be fitted finger tight.

NB: only genuine steam oil should be used.

£12.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Large In-Line Lubricator for model steam boilers

This Large in line displacement type lubricator is intended for use with steam plants where the boiler has a steam stop tap fitted, enabling the live steam to the engine to be shut off to allow the lubricator to be emptied and replenished with fresh steam oil.  Two union nuts and 5/32" union rings are supplied for silver soldering to the steam pipe.  The hexagon lubricator cap eases removal if it locks 'tight' in use.  It should only be fitted finger tight.

Height overall is 1 3/4" or 43mm. the diameter is 5/8" or 15mm

NB: only genuine steam oil should be used.

£15.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Lubricator with Stop Valve for model steam boilers

This displacement type lubricator is intended for use with steam plants where the boiler does not have a steam stop valve fitted.  By closing the lubricator stop valve, this enables the live steam to the engine to be shut off to allow the lubricator to be emptied and replenished with fresh steam oil.  The steam outlet thread is 1/4" x 32tpi.  The lubricator can either be fitted straight to the inlet of the engine or with an extension piece/pipe.  A union nut and 5/32" union ring are supplied for silver soldering to the steam pipe.  The hexagon lubricator cap eases removal if it locks 'tight' in use.  It should only be fitted finger tight.

NB: only genuine steam oil should be used.

£25.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Larger Lubricator with Stop Valve for model steam boilers

This displacement type lubricator is intended for use with steam plants where the boiler does not have a steam stop valve fitted.  By closing the lubricator stop valve, this enables the live steam to the engine to be shut off to allow the lubricator to be emptied and replenished with fresh steam oil.  The steam outlet thread is 1/4" x 32tpi.  The lubricator can either be fitted straight to the inlet of the engine or with an extension piece/pipe.  A union nut and 5/32" union ring are supplied for silver soldering to the steam pipe.  The hexagon lubricator cap eases removal if it locks 'tight' in use.  It should only be fitted finger tight.

NB: only genuine steam oil should be used.

£27.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Male Elbow for model steam boilers

This male elbow can be fitted to boilers either in the dome of a horizontal or a top bush of a vertical boiler allowing the steam pipe to be fitted in close proximity to the boiler. The  elbow thread size is 1/4" x 32tpi at both ends

£3.00 + Postage Extra

Quantity:

Divider

 

Back to Top

No 5 Gas Jet

No 5 gas jet for most burner applications

Thread size 1BA

£2.20 + Postage Extra

Quantity:

Divider

 

Back to Top

No 12 Gas Jet

No 12 gas jet for larger size applications

Thread size 1BA
Hole size 0.3mm

£2.20 + Postage Extra

Quantity:

Divider

 

Back to Top

No 5 Gas Jet Holder pipe for model steam boilers

This jet holder pipe will fit burners with a mixer tube of internal diameter 8mm or 5/16".  It is fitted with a knurled nut with a 1/4" x 32tpi thread and a no 5 gas jet.  It is suitable for all Cheddar Models' boilers and smaller size boilers

Overall length is 8" or 200mm

£9.00 + Postage Extra

Quantity:

Divider

 

Back to Top

No 8 Gas Jet Holder pipe for model steam boilers

This jet holder pipe will fit burners with a mixer tube of internal diameter 8mm or 5/16".  It is fitted with a knurled nut with a 1/4" x 32tpi thread and a no 8 gas jet.  It is suitable for all Cheddar Models' boilers and smaller size boilers

Overall length is 8" or 200mm

£9.00 + Postage Extra

Quantity:

Divider

 

Back to Top

No 8 Gas Jet

No 8 gas jet for most burner applications

Thread size 1BA

£2.20 + Postage Extra

Quantity:

Divider

 

Back to Top

Pack of 14 O-rings of various sizes to cover most replacement requirements for Cheddar Models' steam plants.

This pack includes o-rings for

  • Lubricator cap
  • Safety valve, bottom one on high pressure; and top/bottom on low pressure
  • Gas can/refill adaptor
  • Goodall valve
  • Stop tap spindle
  • Vacuum relief valve
  • Sight glass
  • EGV/ABC gas valve
  • Level plug

£2.25 + Postage Extra

    Quantity:

Divider

 

Back to Top

Pack of 3 1/4x32 Blanking Plugs

These are used to seal unused bushes or tappings in model steam plants.

Thread size 1/4" x 32 tpi

Head size to fit 2BA spanner

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Pack of 3 brass Coned Unions, for use with 1/8th" pipe.

Pack of 3 brass coned unions, for use with 1/8th" pipe.

These are used on 1/8th pipe to make a better seal when used for gas connections.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Pack of 3 Union Nuts, 1/4 x 32.

Used for most pipe fittings.

These can be used if you want to make up your own pipe assemblies for example

  • Steam pipes
  • Gas pipes

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Pack of 3 Union Nuts, 1/4 x 40.

Used for most pipe fittings.

These can be used if you want to make up your own pipe assemblies for example

  • Steam pipes
  • Gas pipes

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Pack of 6 Union Rings for 5/32" pipe

These union rings should be tapped onto the pipe end and silver soldered into place.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Pack of Boiler Bushes

This set comprises:

  • 5 no. 1/4' x 32 tpi fittings bushes
  • 1 no. 5/16' x 26 tpi safety valve bush
  • 1 no. 3/16' x 40 tpi syphon pipe bush

These brass bushes are for fitting in a new boiler to enable the use of Clevedon Steam fittings

£6.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Safety Valve for model steam boilers

This safety valve is intended for use on smaller volume/working pressure boilers and is nominally set to 45psi (3 bar).  The blow off pressure can be adjusted between 30psi (2 bar) and 60psi (4 bar) by resetting the lock nuts.

The boiler bush thread size is 5/16" x 26tpi.

£9.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Servo Bracket

This useful stainless steel bracket allows a strong, discreet  means of mounting a standard sized servo eg: Futaba or Hi-Tec.  Two holes allow the bracket to be screwed directly to the model. Four M3 pan head screws are supplied for securing the servo to the bracket.

£3.50 + Postage Extra

Quantity:

Divider

 

Back to Top

Servo Gas Valve

This valve is designed to be either bolted to the model or glued to a standard size servo with epoxy glue.  The lever, which is adjusted by loosening the lock nut, moving the lever and re-tightening the nut, needs a control rod to the servo arm to operate it.  Two 1/8" coned unions are supplied along with union nuts for silver soldering to the gas pipes.  The unions must be tightened before the bracket lock nut.

£18.00 + Postage Extra

Quantity:

 

 

Divider

 

Back to Top

Silicone Tube

Supplied in 1ft / 300mm lengths

Used for connecting low pressure water pipes, exhaust connections, etc.
If you require longer lengths just enter the amount into the Quantity box below, a number of 3 would give you a 3ft / 900mm length

£1.00 per ft / 300mm + Postage Extra

Quantity:

 

Divider

 

Back to Top

Steam Oil

High quality thicker grade steam oil supplied in 250ml plastic bottles with easy to use sealable spout.

£4.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Steam Stop Valve 32tpi for model steam boilers

This valve can be fitted in the dome, or top bush of a vertical boiler and enables the steam to be shut off to the engine.  It is compatible with Cheddar Models' boilers and has a thread size of 1/4" x 32tpi.  A union nut and ring for silver soldering to a 5/32" steam pipe are supplied

£15.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Steam Stop Valve 40tpi for model steam boilers

This valve can be fitted in the dome, or top bush of a vertical boiler and enables the steam to be shut off to the engine.  It has a thread size of 1/4" x 40tpi.  A union nut and ring for silver soldering to a 5/32" steam pipe are supplied

£15.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Syphon Pipe for model steam boilers

This syphon pipe will fit boilers either in a dome bush on a horizontal boiler or a side bush near the top of a vertical boiler.  The thread size is 3/16"x 40tpi for the boiler and 3/16" x 40tpi for the pressure gauge.  It is designed to be screwed into the bush and gently bent to the position required

£8.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Syringe

Useful for emptying Lubricators, Condensor tanks or oiling engine parts (supplied with a blunt needle)

£1.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Male Tee Piece

Male tee piece for model steam boilers

This male Tee piece can be fitted to boilers either in the dome of a horizontal or a top bush of a vertical boiler allowing more than one steam pipe to be fitted in close proximity to the boiler.  The  tee piece could also be used in line as a branch for another pipe take off.  It is also suitable for allowing two gas jet holders to be run from a single gas supply pipe.  Thread size is 1/4" x 32tpi on all ends.

£3.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Thread Converter for model steam boilers

This thread converter is intended for use on boilers which are tapped with 1/4" x 40tpi and allows 1/4" x 32tpi nuts and pipework to be connected.

£2.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Throttle Lubricator

This Displacement type Lubricator is intended for use with steam engines which do not have their own throttle.  The lever is connected to the throttle servo via a control rod and is designed to work through 90 degrees.  The position of the lever on the spindle can be adjusted by loosening the lock nut, moving the lever and re-tightening the nut.  It is recommended that a drop of sealant is used on this thread.  The steam inlet and outlet threads are 1/4" x 32tpi and come complete with union nuts and 4mm rings for silver soldering to the steam pipes.  The lubricator can either be fitted straight to the inlet of the engine or with an extension piece/pipe.  The hexagon lubricator cap eases removal if it locks 'tight' in use.  It should only be fitted finger tight.

nb: only genuine steam oil should be used.

£30.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Vacuum Relief Valve 32tpi

Thread size 1/4 x 32 tpi

This valve prevents a vacuum being created in the boiler when it cools down and stops steam oil and residue from the engine and lubricator being sucked into the boiler and dirtying the sight glass.

Ideally it needs to replace the top sight glass blanking plug or in the highest bush on the boiler.  It is straightforward to fit, using a 2BA spanner and a drop of sealant on the thread.

£5.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Vacuum Relief Valve 40tpi

Thread size 1/4 x 40 tpi

This valve prevents a vacuum being created in the boiler when it cools down and stops steam oil and residue from the engine and lubricator being sucked into the boiler and dirtying the sight glass.

Ideally it needs to replace the top sight glass blanking plug or in the highest bush on the boiler.  It is straightforward to fit, using a 2BA spanner and a drop of sealant on the thread.

£5.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Water Gauge Fittings 32tpi for model steam boilers.

These fittings are also suitable for Cheddar Models' boilers and have 1/4" x 32tpi threads for the boiler bushes.

The fittings come with two gauge glasses.  When ordering this product please ensure that you specify the length of gauge glass that you require.  This is calculated by measuring centre to centre of the boiler bushes and subtracting 8mm (5/16").

£17.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Water Gauge Fittings 40 tpi for model steam boilers.

These fittings have 1/4" x 40tpi threads for the boiler bushes.

The fittings come with two gauge glasses.  When ordering this product please ensure that you specify the length of gauge glass that you require.  This is calculated by measuring centre to centre of the boiler bushes and subtracting 8mm (5/16").

£17.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Whistle Valve

This valve is designed to be mounted, with a drop of sealant, in a spare top bush or tapping in the dome of the boiler.  A remotely mounted servo with rod can then be used to activate the valve lever through 90 degrees.  A 1/8" coned union and nut are provided for silver soldering to a whistle pipe.  Adjustment of the lever is achieved by loosening the spindle lock nut, moving the lever and re-tightening it.  Thread lock can be applied if desired.  The inlet thread is 1/4" x 32 tpi.

£18.00 + Postage Extra

Quantity:

Divider

 

Back to Top

Electronic Engine Control Unit

This electronic control unit is designed for use with engines which have separate valve gear and throttle. It enables the engine to be used from one channel and automatically controls the forward and reverse along with the throttle. The radio transmitter must have a spring loaded to centre stick

£40.00 + Postage Extra

Quantity:

Divider

 

 

 

 Back to Top

 

 

 

 

 

Divider

 

© Clevedon Steam 2023. All rights reserved
Terms and Conditions